Toe Drag and Other Signs You're on the Wrong Size Snowboard

By Chris O'Shea and Anna Nikstad, Welcome Board Store, Mornington

Ever laid a big carve over on your toe edge and suddenly found yourself face down in the snow? That's often not your technique. It's your boots dragging because the board is too narrow for your feet. Here's how to tell if your board is off, and what to check before you buy the next one.

You picked it by standing it up next to you

The old chin-to-nose rule is only a rough first check. Your board has no idea how tall you are. What it responds to is weight, because that's what flexes it into a turn. Put two riders of identical height but 15 kg apart on the same board and one of them will be on the wrong size. When height and weight disagree, go with weight.

Your boots drag, or the board feels like hard work

Width matters as much as length. The narrowest part of the board, the waist, should suit your boot size, with your toes and heels only just overhanging each edge. Too narrow and you get toe or heel drag on hard turns. Too wide and the board is slow and tiring to tip from edge to edge. As a rule of thumb, if you wear a US men's 10.5 to 11 or bigger, start looking at wide boards.

It doesn't suit the way you ride

Once you've found your weight range on a board's chart, your style decides where you sit in it. Go to the shorter end if you're learning or riding park, the middle for a bit of everything, and longer for speed, carving and traditional powder boards. The exception is volume-shifted powder shapes. Lib Tech recommend riding the Orca 3 to 6 cm shorter than your usual board, because the extra width does the floating. For kids, skip the "grow into it" board. An oversized board makes turning hard.

Size your next board properly

Our full snowboard size guide has the height and weight chart, the boot size to waist width chart, the official size ranges for the CAPiTA, YES, Lib Tech and Bataleon models we stock, plus women's and kids' sizing.

Planning next season or a trip overseas? Bring your boots into the shop at 207 Mornington-Tyabb Road, Mornington, and we'll help you find the right length and width.

Back to blog
1 of 3